Every router table needs a power switch--it's unacceptably dangerous, not to mention awkward, to use the switch on the router itself, buried out of sight beneath the table. This ready-to-use accessory lets you mount a switched power outlet right where you need it at the front of your router table or other shop-made fixture. It's a lockable switch; if you have small children around the shop, just remove the toggle tip to make the router table safe from unauthorized start-up. The switch controls power to a built-in 110-volt receptacle which handles loads up to 15 amps--plenty for any 110-volt router on the market. Screw tabs allow easy surface mounting wherever convenient. 5-3/4" long x 2-1/2" wide x 3" deep. Comes with 5 ft. power cord.

Simply plug in the speed control then plug your router into the speed control. Adjust speed from 0 RPM to full speed. The Heavy Duty Speed Control features an aluminum case, and is recommended for home shop or industrial use. 3 position rocker switch- Variable / OFF / Full Speed. Full power and torque at all speeds. Go back and forth from any preset speed to full speed at the flip of a switch. Works with all routers 3-1/4 HP or less. 120V 15AMP. Doesn't work with soft start routers.

15 amp Heavy Duty Foot Switch. This switch works as a on / off switch. Foot pressure down turns the switch on, with second foot pressure turning the switch off.

15 amp Heavy Duty Foot Switch This switch works only when it is held down with foot pressure.