Dubby...the Original Crosscut Sled

No miter gauge on the market can offer you the margin of safety provided by this “sled”. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way when you don’t need it. With 35 lbs. of hold-down pressure, the clamp will hold small pieces as you cut them with your fingers out of harms way.TheDubby system is available in three different packages: Left Side Cutting package, Right Side Cutting package, and the Deluxe Double Dubby package, which includes both the left and right side Dubby’s.

The EZ Square Table Saw Rip Fence is the perfect aftermarket fence if you're serious about saving time and making straight cuts. The EZ Square Table Saw Fence was designed to be that dependable piece of equipment in your workshop that you can trust every time you use it. It takes a simple, no-frills approach that gets the job right every time.
The EZ Square Table Saw Fence fits most saw and some drilling may be required.

• T-Slots on the fence top and front and back faces let you mount all sorts of accessories like Board Buddies and Featherboards.
• The EZ Square Fence can be used right or left of the saw blade.
• UHMW Face on both left and right faces means super smooth operation.
• T-Track mounting of the fence rails means the fence rails can be adjusted  to the left or right without re drilling.
  

The Uni-T-Fence is a heavy duty aluminum extrusion up grade fence for the Delta® Unifence Table Saw Guide System designed by Peachtree Woodworking Supply, Inc.. It replaces the Stock Delta Fence which mounts to their saw fence guide. You must own the Delta UniFence to use this product. Mounting the Uni-T-Fence to your Delta® Unifence is as simple as sliding the Stock fence off and sliding the Uni-T-Fence on. There are no holes to drill.

MORE DETAILS

When only the best will do! Our SOLID CAST IRON router table top with lift out router insert gives you the best of both worlds! A full 1½” thick of solid cast iron, prevent virtually any sort of vibration! The table is easy to install with pre-drilled holes for attaching to any table saw! Built in standard miter slot for use with most any miter gauge. Machined to our exacting specifications our cast iron router wing is built to last, and built to perform.

If you are short on space in your shop, this extension kit is a must for any table saw.

The great feature of this extension table is that it will fold down out of the way, or come completely off the table saw in a matter of seconds. This 16" extension kit will fit light duty, heavy duty, and contractor saws which have a motor hanging out the back of the saw.

Table Saw Extension Kit Includes:

A single, quick folding leg for easy set up and storage. Non-marring wide T-bar base ensures stability. An easy rolling, 13” x 2” galvanized dual ball bearing roller.150 pound capacity. Vertical adjustment is ideal for use with table saws, drill presses and bandsaws 26” - 45” in height .

With the PALS on your saw, "pounding" the trunnion into place using a hammer & block of wood are gone forever!

The A-Line-It was selected as the "Top Value" in the WOOD Magazine article that compared woodworking machine alignment tools.

• The perfect tool alignment system for hobbyists and small shops.
• The 1" capacity dial indicator reads in .001" increments for absolute precision.
•Self-adjusting "Smart Bar" so the perfect fit in the miter groove is automatic.
• Leveling knobs adjust for any miter groove depth.
• On a table saw, it will allow you to test table saw alignment, arbor shaft runout, saw blade runout, rip fence alignment, and fence straightness.

BOARD MATES
ANTI-KICKBACK HOLD DOWN DEVICES

Board Mates use non-marring neoprene rubber wheels that turn clockwise only, these wheels work as anti kickback and hold down devices. The Board Mates body is made of die-cast aluminum with a spring loaded swing arm that applies pressure down on a work piece as it rolls under the anti-kickback wheels. The Board Mates system has adjustments for spring tension as well as forward and backwards body adjustment after mounting. Board Mates come in pairs which can be mounted on fences 1-1/2” to 3” high x 1” or wider. Each Board Mate consists of mounting bracket, swing arm body with spring, and a adjustable roller.

• Yellow Board Mates are for table saws and router tables
• Green Board Mates are for shapers
• Orange Board Mates are for radial arm saws

Our custom made Board Buddies / Board Mates mounting bracket set (1 pair) make mounting and adjusting your Board Buddies a snap. Made of UHMW comes with bolts and knobs. Fits our Mini T-Track (For 1/4" Hex Head Bolt)

Link Belts reduce vibration in any belt driven machine! Common V-belts develop a "memory" and retain their non-operating shape causing annoying and unnecessary machine vibration. Unlike V-belts, these specially engineered link belts do not develop a "memory", but retain their flexibility for smooth operation. Link Belt is 1/2" wide.

Our compact, Universal Fence Clamps allow you to secure a variety of shop made auxiliary fences to your existing table top fences without having the clamp block your work. The clamp arm simply fits into a 3/8” hole in the top of the auxiliary fence, keeping the clamp out your way. That simply means no more cumbersome wood screws or C clamps, and no need to screw into your expensive fence! Works great for table saws, band saws, cutoff saws, router fences. Clamps come in sets of 2.

Give your projects a custom look by making your own moldings. No more messing with all those clamps to secure your jigs to your saw. The system uses your miter slots to secure the the cove jig to your table saw, or use four 30mm Magswitch™ magnets (not included). This unique design allows for fast easy set up for stock 7” wide and 1½” thick. By angling your table saw blade it will create elliptical coves that you won’t find in lumber centers. The Cove Cutting Tablesaw Jig includes a featherboard hold down, 4 miter slot locking devices and all the necessary hardware.